Linear Velocity Transducers
Series 100 Linear Velocity Transducers
The Series 100 Linear Velocity Transducers are inductive, instantaneous velocity transducers. By moving a magnet through a pair of series opposed coils, the transducer will output a DC voltage proportional to the instantaneous velocity. No excitation voltage is required. Available ranges are from 0.5" to 24.0".
Main Features:
| Measurement Ranges | 0.5 to 24 inches |
| Maximum Non-Linearity | 2.5% Full Scale |
| Housing Outer Diameter | varies |
| Operating Temperature Range | -65°F to +140°F |
| Sensitivity | Up to 500 mV/inch/second |
| Excitation Voltage | None required |
If you are looking for an equivalent to the discontinued line of Schaevitz VT-Z transducers, please click here:
Trans-Tek Equivalent Comparison Chart
To download our most recent catalog bulletin, click here: Ser100_04C.pdf
{Note: if you have difficulties opening a PDF file, please right click over the link, "save target as"
to a location in your PC, then open the file from there. Thank you!}
All catalog bulletins have been formatted in Adobe's .PDF format for the best viewing quality. Adobe Acrobat Reader is required to view and/or download the files. You may obtain a copy of this program by visiting Adobe's web site at:
All pages from our catalog - the "Handbook of Transducer Design" - are contained on this web site in PDF form. They can be found in each appropriate product category.
To request additional information - such as application assistance, a price list or a printed catalog - please select "Info Request".
Thank you for expressing interest in Trans-Tek!